Net partition
Attach the net partition
Attach at the back
›
Place the crossbar in the supports A .
›
Snap the carabiners B into the lashing eyes.
›
Pull the straps rmly at the free ends C .
Fasten in the front
The procedure is analogous to the process behind.
The lashing eyes for the carabiner are located under
the central body pillars.
Loosening
Loosening takes place in the reverse order to xing.
Double-sided oor covering
Overview
Depending on the equipment, the vehicle may be
equipped with a double-sided oor covering in the
luggage compartment. One side is made of fabric,
the other side is washable.
Rigid boot cover
Removing and inserting
The maximum load of the other fastening nets is
1 kg.
Removing
›
Unhook the straps.
›
Remove the cover.
Inserting
›
Insert the cover until it clicks into place.
›
Hook in the retaining straps.
Store the cover behind the rear seats
›
Hook the cover behind
the rear seats.
Variable loading oor in the boot
Setting the position
The maximum load of the variable loading oor is
75 kg.
Set the variable loading oor to the upper or lower
position
›
Lift the variable load
oor and pull it to-
wards you.
›
To set in the upper po-
sition, place the varia-
ble loading oor in the
front area on area A .
›
To set in the lower po-
sition, place the varia-
ble loading oor in the
front area on space
B .
174
Storage space and interior equipment › Net partition
To Next Page
Loading...
Need help?
General
