Mechanically unlocking and locking the door
Unlocking and locking the door with the lock cylin-
der
Remove the cover
›
Pull the handle on the
front left door and hold
it in place.
›
Insert the key into the
recess on the under-
side of the cover.
›
Lift the cover in the di-
rection of the arrow.
›
Release the door han-
dle.
Locking and unlocking
›
Insert the key into the
lock cylinder and un-
lock or lock it.
Install cover
›
Pull on the door handle
and hold it.
›
Replace the cover.
›
Release the door han-
dle.
Locking the door without the lock cylinder
›
Open the door.
›
For vehicles with a panel over the opening, remove
the panel.
›
Insert the key or a at-head screwdriver into the
slot.
›
Turn the key or at-head screwdriver towards the
outside of the vehicle (spring-loaded position).
After closing, the door is locked.
Locking the door without the lock cylinder
›
Open the door.
›
For vehicles with a panel over the opening, remove
the panel.
›
Insert the key or a at-head screwdriver into the
slot.
›
Use the key or a at-blade screwdriver to push it in
towards the door.
After closing, the door is locked.
Keyless locking (KESSY)
Usage
The keyless locking system, KESSY, enables unlock-
ing and locking of the vehicle without actively using
the remote control key.
Operation
Keep the key with you when unlocking and locking.
The sensors on the handle are intended to be operat-
ed with bare hands, e.g. wearing gloves may aect
the function of the sensors.
Release
›
Grab the door handle.
›
Open the door.
24
Keys, locks and alarm system › Keyless locking (KESSY)
To Next Page
Loading...
Need help?
General
