Skoda Scala 2020 - Speed limit warning

Speed limit warning
Usage
The system oers the possibility to set a speed limit
beyond which an acoustic warning signal will sound
and the following warning message appears in the
display of the instrument cluster.
Settings
Setting the speed limit
›
Select Warning at or (depending on the display type)
and conrm.
›
When the vehicle is stationary, set the desired
speed limit and conrm.
›
While driving, drive at the desired speed and con-
rm it as the speed limit.
Resetting the speed limit
›
Select
Warning at or (depending on the display type)
and conrm.
›
To reset the speed limit, conrm the stored value.
If the journey is interrupted for more than 2 hours,
the set limit is deactivated, but the set value remains
stored.
Vehicle status
Display
The vehicle status is displayed in the following menu
in the infotainment system:
Menu item for the vehicle status
Or:
Menu item for the vehicle status
A
Vehicle areas displayed in colour indicate associ-
ated warnings
B
No notication
Warning messages regarding the vehicle con-
dition and their quantity
C
Display of information about the condition
of the START-STOP system
▶
Activation/deactivation of information
regarding the messages of the START-STOP
system in another screen display
Functionality
In the event of a system fault, messages regarding
the fault in question are displayed on the instrument
cluster display when the ignition is switched on.
Messages in relation to faults can also be displayed in
the Infotainment.
The warning messages will continue to be dis-
played until the malfunctions have been remedied.
After the rst display of the message, only the indi-
cator lights
(Hazard) or (Warning) are dis-
played.
60
Driver information system › Speed limit warning