F
Range (for natural gas vehicles, the range with
petrol, CNG and the sum of the ranges with both
fuel types are displayed separately).
Memory
The system saves the driving data in the following
memories:
Since start
▶
Driving data from the time of switching on the ig-
nition until the ignition is switched o again is stor-
ed in the memory. If the journey is interrupted for
more than 2 hours, the memory will be reset.
Long-term
▶
The driving data of all trips up to a total of 99
hours and 59 minutes driving time or 9999 km
driving distance is stored in the memory. If one of
the listed values is exceeded, the memory is reset.
Since refuel
▶
Driving data from the time the fuel tank was last
lled is stored in the memory. The memory is reset
the next time the tank is lled.
Operation
Display driving data in the display of the instru-
ment cluster via the operating lever
›
Select the menu item for the driving data in the
main menu in the instrument cluster display.
A
Press - Select infor-
mation/Set values
B
Press - Conrm in-
formation
Display driving data in the display of the instru-
ment cluster via the multi-functional steering
wheel
›
Select the menu item for the driving data in the
main menu in the instrument cluster display.
A
Rotate - Select in-
formation/Set values
Press - Conrm in-
formation
Displaying driving data in the infotainment system
The driving data is displayed in the following menu in
the infotainment system:
Menu item for driving data
Or:
Menu item for the driving data
Select and reset the memory for driving data in
the display of the instrument cluster using the
control lever
›
To select the memory
for the displayed driv-
ing data, press button
A repeatedly.
›
To reset the memory,
press and hold button
A .
Select memory for driving data in the display of
the instrument cluster via the multifunction steer-
ing wheel and reset it
›
To select the memory
for the displayed driv-
ing data, press control
wheel A repeatedly.
›
To resetthe memory,
hold the dial A .
Selecting the memory in the infotainment system
To select the memory, use the functional areas
in the following menu in the infotainment system:
Menu item for driving data
Or:
Menu item for the driving data
Resetting the memory in the infotainment system
The memory is reset in the following menu in the in-
fotainment system:
Or:
Settings
Select driving data to be displayed
The driving data to be displayed is selected in the
following Infotainment menu:
Or:
Setting units
The units are set in the following infotainment menu:
Or:
59
Driver information system › Driving data
To Next Page
Loading...
Need help?
General
