Status display in the instrument cluster display
lights up - System is activated and ready to
intervene
lights up - System is activated and ready to
intervene
lights up - System intervenes
lights up - System intervenes
Display
Display example in black and white display.
Lane boundary highligh-
ted on the right: system
intervenes on the right
when approaching the
lane marking.
In the coloured display,
the lines are highlighted
in colour.
Warning through steering wheel vibrations
The steering wheel vibrations are triggered in the
following situations:
▶
The vehicle crosses the boundary line without the
indicator light switched on.
▶
The system is not able to keep the vehicle within
the lane.
›
Correct the steering movement in the event of vi-
brations.
Operating conditions
✓ The driving speed is higher than 60 km/h.
✓ The lane markings are clearly visible.
Function restriction
The system function may be restricted in the follow-
ing cases:
▶
The eld of view of the sensor is limited by a dirty
screen or an obstacle or a preceding vehicle.
▶
If the weather conditions are unfavourable.
▶
The vehicle is making a sharp turn.
▶
The vehicle is travelling on a sloping road or in ruts.
▶
When the driving lane is too narrow.
▶
The vehicle drives through a construction site.
WARNING
Danger of incorrect steering intervention!
Certain objects or markings on the road may be erro-
neously recognized as lane markings.
▶
Always keep your hands on the steering wheel and
be prepared to override the steering intervention.
Settings
Automatic activation
Lane Assist is always automatically activated when
the ignition is switched on.
Activation/deactivation in the instrument cluster
›
Press the button on the multifunction steering
wheel.
›
Select
Lane Assist
.
Activation/deactivation in Infotainment
In the menu .
Troubleshooting
Message regarding system unavailability
›
Clean the windscreen in the sensor area.
›
Stop the engine and restart again after a short
time.
›
If the system is still not available, seek the help of a
specialist garage.
Lane change assist system Side Assist
Usage
The system uses optical signals in the exterior mirror
to alert the driver to vehicles that could be danger-
ous when changing lanes.
Functionality
The system monitors the area both beside and be-
hind the vehicle.
The system warns of an approaching vehicle through
the indicator light
in the exterior mirror cover on
the vehicle side, where the vehicle is recognized.
Driving situations in which a system warning oc-
curs
141
Driver assist systems › Lane change assist system Side Assist
To Next Page
Loading...
Need help?
General
