Skoda Scala 2020 User Manual

The entry to be searched for can be entered includ-
ing diacritics.
The keyboard will only provide characters that
match the stored entries.
›
To display searched entries tap
.
Show additional keypad languages
To use the additional keypad languages, the desired
languages must be set rst.
›
Tap
or repeatedly tap the ag symbol until the
desired language keypad is displayed.
Further character variants
›
Press and hold the sign with the symbol .
›
Select the desired symbol.
Setting up additional keyboard languages
›
Tap Additional keypad languages .
Voice control
Functionality
Voice control principle
Voice control works according to the principle of
dialogue between the user and the Infotainment sys-
tem.
The user says a voice command. The Infotainment
system responds or executes the voice command.
Advanced voice control
The vehicle's advanced voice control enables the ve-
hicle functions to be searched and operated online.
Advanced voice control understands uent whole
sentences. You do not need to use set commands or
phrases.
The advanced voice control can, for example, search
for special destinations or dictate SMS messages if
the connected telephone makes this possible.
This function allows you to combine the search in
the online and oine data of the Infotainment. The
transition between online and oine search is seam-
less and imperceptible to the user.
Operating conditions
✓ Ignition on
✓ Infotainment switched on
Operating conditions for advanced voice control
To use the advanced voice control, the following
conditions must also be met:
✓ The vehicle supports the function.
✓
The vehicle has Infotainment and functions that
can be controlled by the advanced voice control.
✓ The ŠKODA Connect services are active.
✓ The vehicle is within range of a contractual mo-
bile network, through which the connection to
ŠKODA Connect Services is ensured.
✓ The level of protection of personal data is set to
Share my position .
Requirement for recognition of the activation
command
✓
Activated menu item
Voice control Active
Operation
Switch on voice control
›
Press the button on the multifunction steering
wheel.
Or:
›
Say the activation command “ OK Laura ”.
After switching on, the icon is displayed in the sta-
tus bar.
Enter voice command
›
Speak a voice command with voice control switch-
ed on.
During recognition of the voice command, the icon
is displayed.
The Infotainment system then executes the voice
command or plays the message. During the message,
the
icon is displayed.
After the execution of the voice command, voice
control is switched o.
Correcting a voice command
›
During voice command input, press the button
on the multifunction steering wheel and say a new
voice command.
Stopping voice control
Stopping leaves more time for voice command input,
e.g. for searching for a phone contact.
›
Move your nger up or down over the Infotain-
ment screen.
Or:
›
Say the voice command “
pause ”.
Resuming stopped voice control
›
Press the button on the multifunction steering
wheel.
Or:
›
Tap on in the Infotainment screen.
Stopping the played back message
›
Press the
button on the multifunction steering
wheel.
94
Infotainment Amundsen › Voice control

Skoda Scala 2020 Specifications

General

Brand	Skoda
Model	Scala 2020
Category	Automobile
Language	English