Skoda Scala 2020 - Pedestrian detection system

Activation/deactivation in the instrument cluster
›
Press the button on the multifunction steering
wheel.
›
Select Front Assist .
Activation/deactivation in Infotainment
In the menu .
Show system deactivation in the display of the in-
strument cluster
illuminates together with
or
illuminates together with
Deactivate Front Assist when handling the vehi-
cle on a truck, a car ferry etc.
Troubleshooting
Front Assist is not available
illuminates together with
Or:
illuminates together with
›
Clean the front radar sensor.
›
Stop the engine and start again.
›
If Front Assist is still unavailable, check the brake
lights on the vehicle or on the attached trailer.
›
If the brake lights are working and Front Assist is
still unavailable, seek the help of a specialist ga-
rage.
There was an unfounded warning or system inter-
vention
›
Clean the front radar sensor.
›
If the system is not working properly, disable Front
Assist and seek the help of a specialist garage.
Pedestrian detection system
Functionality
Pedestrian recognition helps to prevent a collision
with crossing or lengthwise moving pedestrians by
enabling automatic braking interventions.
Status display in the instrument cluster display
or lights up - Danger of collision
Risk of collision in a speed range of 5-30 km/h
The system triggers automatic braking.
Risk of collision in a speed range of 30-60 km/h
The system warns of a collision hazard rst. If the
driver does not respond, the vehicle is automatically
braked.
Operating conditions
✓ Front Assist is deactivated.
✓ The vehicle speed is 5-60 km/h.
Speed limiter
Functionality
The speed limiter controls the maximum driving
speed according to the set speed limit.
If the limit is exceeded when driving downhill, brake
the vehicle with the brake pedal.
Status display in the instrument cluster display
illuminates - the cruise control is activated.
ashing - the set limit is exceeded
When the regulation starts
highlighted and the
set limit is displayed.
Operating conditions
✓ The driving speed is higher than 30 km/h.
Operation
Variant without cruise control
A
Activate limiter (control inactive)
Deactivate limiter
Interrupt control (sprung position)
B
Resume control
1)
/ Increase limit
C
Start control with current speed / Reduce
limit
1)
If no speed limit is set, the current speed is set as the speed limit.
136
Driver assist systems › Pedestrian detection system