Skyjack SJ82 T Service Manual

24
SJ82 T, SJ86 T
229040ABA
Section 1 – Scheduled Maintenance Scheduled Maintenance Inspections
1.6-7 Base
1
Base weldment (B)
▪
Make sure there are no visible cracks in
welds or structure and there are no signs of
deformation.
3
Rotary manifold (B)
▪
Make sure all hoses are correctly tightened
and there is no sign of hydraulic leakage.
3
Turret rotation gear (B,C)
▪
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage.
C - Annual Inspection
▪
For the lube procedure, refer to 5.10 Grease
Points.
4
Axles (B,C)
▪
Make sure the front and rear axles are
correctly attached.
▪
Make sure there are no loose or missing parts.
▪
Make sure all the fittings and hose connections
are tight.
▪
Make sure there is no sign of hydraulic
leakage.
C - Annual Inspection
▪
Check the brakes annually. Refer to the
procedure 5.9-6 Brake Inspection.
5
Brakes (B)
▪
Make sure there are no loose or missing parts.
▪
Make sure all the fittings and hoses are
correctly tightened and there are no hydraulic
leaks.
6
Steer cylinder (B)
▪
Make sure there are no loose or missing parts.
▪
Make sure all the fittings and hoses are
correctly tightened and there are no hydraulic
leaks.
7
Steer linkage (B)
▪
Make sure there are no loose or missing parts.
▪
Make sure the tie rod end studs are locked
and there is no visible damage.
7
2 3
6
1
4 4
5
5
To order go to Discount-Equipment.com

Skyjack SJ82 T Specifications

General

Brand	Skyjack
Model	SJ82 T
Category	Boom Lifts
Language	English