Skyjack SJ82 T - 3.4 Features and Devices; 3.4-1 Drive Speed and Direction; 3.4-3 Tilt Switch and Load Sensing

29
SJ82 T, SJ86 T
229040ABA
Scheduled Maintenance Inspections Section 1 – Scheduled Maintenance
1.6-10 Optional equipment (B)
Do the inspection that follows, and make sure:
1
Generator
▪
There are no loose or missing parts, and there
is no visible damage.
▪
All hoses are correctly tightened and there is
no sign of hydraulic leakage.
2
Flashing amber light
▪
The lamp is correctly attached, and there is no
visible damage.
3
Welder
▪
The welder and the welder tray are correctly
attached.
▪
There are no loose or missing parts, and there
is no visible damage.
▪
There are no loose wires or missing fasteners.
4
Cold or arctic weather package
▪
The heater plugs are correctly attached with
no visible damage.
▪
There is no sign of engine oil leakage.
5
Tool tray
▪
The tray is correctly attached with lock-pins,
and there is no visible damage.
6
Glazier
▪
There are no loose or missing parts, and there
is no visible damage.
7
Pipe rack
▪
There are no loose or missing parts, and there
is no visible damage.
6
21 4
7
3
5
To order go to Discount-Equipment.com