20
Section 1 – Scheduled Maintenance Scheduled Maintenance Inspections
5
Hydraulic pump and motor (B)
▪
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage.
▪
Make sure all bolts are correctly tightened.
▪
Make sure all fittings and hoses are correctly
tightened and there are no hydraulic leaks.
Engine and Components
6
Engine Control Console
▪
Ensure there are no loose or missing parts and
there is no visible damage.
7
Engine pivot tray (B)
▪
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage.
▪
Make sure that the engine is correctly attached
to the pivot tray.
▪
Make sure the tray-securing bolt is in place.
8
Muffler and exhaust (B)
▪
Make sure that the muffler and exhaust
systems are correctly attached with no visible
damage.
Engine fuel leaks (B,C)
▪
Make sure that there no fuel leaks at the
engine.
▪
Make sure there is no visible damage.
WARNING
Explosion or fire hazard. Do not smoke near the
fuel system. If you do not obey, there is a risk of
death or serious injury.
Engine fuel filter (B,C)
▪
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage.
C - Annual Inspection
▪
For the engine fuel filter replacement
procedure, refer to the engine manual.
9
Radiator (B, C)
▪
Make sure there are no loose or missing parts.
▪
Make sure there is no visible damage.
▪
Make sure that the radiator is correctly
attached to the engine tray.
▪
Check the coolant level and add more if
necessary.
C - Annual Inspection
▪
Check the coolant strength. For
recommended coolant change intervals, refer
to the engine manual.
9
7
6
5
8
To order go to Discount-Equipment.com
To Next Page
Loading...
Need help?
General
