Chapter 4
29 smarttech.com/kb/171257
Chapter 4: Configuring the network
You can connect the display to a network using Wi-Fi or an Ethernet connection. Before connecting
the display, your organization’s network administrators need to configure the network to allow
users to update the display’s firmware automatically and use all the features of the iQ experience.
To configure the network
1. To configure the network for use with all the iQ experience features, see Configuring the
display’s network connection in Connecting a SMART display with the iQ experience to a
network.
2. Open the port required for automatic firmware updates:
Protocol Port range
TCP 80
3. Add the following URLs to the network whitelist:
URL
http://api.lango-tech.cn
http://lango-tech.cn/
http://otaa.lango-tech.cn
http://otag.lango-tech.cn
http://downloads.smarttech.com
To Next Page
Loading...
