SMART MX Series Instruction For Installation And Maintenance

APPENDIX B
ADJUSTING DISPLAY SETTINGS
62 smarttech.com/kb/171257
Option Values Function Notes
Automatically check for
updates
Enable
Disable
Enables or disables checking and
downloading updates for the
display’s firmware
Enabled by default.
If this is disabled, manually check
for updates in Update below.
Power saving mode
Enable
Disable
Enables or disables power saving
mode
Enabled by default.
When enabled, power saving mode
activates after 90 minutes of
inactivity.
Enabling Power saving mode
makes RS-232 control of the display
unavailable until the display is
turned on using the power button
on the front control panel .
Update
Option Values Function Notes
Firmware version
[N/A] Shows technical information about
the display’s scalar firmware.
To see the firmware version use
the About option (see About on the
facing page.
Update
[N/A] Checks for updates to the system
software
If an update is available, the text
changes to Apply update now.
NOTE
The display must be connected
to the Internet to check for
system software updates. Check
the display’s network settings.
To checkthe network settings,
see Network on page59.
Recovery
Option Values Function Notes
Restore user settings
[N/A] Resets any options the user may
have changed
[N/A]
Restore factory settings
[N/A] Resets all options to their default
values
Only administrators should reset
the display.

SMART MX Series Specifications

General

Aspect Ratio	16:9
RAM	4 GB
Internal Storage	32 GB
Refresh Rate	60 Hz
Response Time	8 ms
Brightness	350 cd/m²
Contrast Ratio	4000:1
Dimensions (W x H x D)	Varies by screen size
Weight	Varies by screen size
Screen Sizes	65", 75", 86"
Operating System	Android
Connectivity	HDMI, USB, Wi-Fi, Bluetooth
Audio	Built-in speakers
Touch Points	20
Viewing Angle	178°
VESA Mount	Yes
Display Type	LED-backlit LCD