SMART MX Series Instruction For Installation And Maintenance

Chapter 5
31 smarttech.com/kb/171257
Chapter 5: Turning on the display for the first
time
Turn on the display after mounting it and connecting power and devices.
To turn on and set up the display for the first time
1. Flick the switch beside the AC power inlet to the ON(I) position.
2. Select your preferred language, and then tap Next.
3. Select your country, and then tap Next.
4. Select your time zone, and then tap Next.
5. Set the date, and then tap Next.
6. Set the time, and then tap Next.
7. Name the display, and then tap Next.
8. If the display isn’t using a wired network connection, select a wireless network, and then tap
Next.
IMPORTANT
The display needs an internet connection for downloading and installing important updates.
Ask the network administrator to confirm that the network has been correctly configured for
the iQ experience. For more information about network configuration, see Connecting a
SMART display with the iQ experience to a network.
9. Select the list of applications that will appear in the launcher, and then tap Next. For more
information about the apps, see the SMART Board MX series interactive displays user’s guide
(smarttech.com/kb/171284).
10. Select the apps you want to appear in the Apps Library, and then tap Next.
TIP
To change which apps appear in the Apps Library, see Adding or removing apps from the
launcher.

SMART MX Series Specifications

General

Aspect Ratio	16:9
RAM	4 GB
Internal Storage	32 GB
Refresh Rate	60 Hz
Response Time	8 ms
Brightness	350 cd/m²
Contrast Ratio	4000:1
Dimensions (W x H x D)	Varies by screen size
Weight	Varies by screen size
Screen Sizes	65", 75", 86"
Operating System	Android
Connectivity	HDMI, USB, Wi-Fi, Bluetooth
Audio	Built-in speakers
Touch Points	20
Viewing Angle	178°
VESA Mount	Yes
Display Type	LED-backlit LCD