SMART MX Series - Appendix B: Adjusting Display Settings; Exiting the Displays Settings; Network

Appendix B
59 smarttech.com/kb/171257
Appendix B: Adjusting display settings
Exiting the display’s settings 59
Network 59
Screen lock 60
Advanced 61
Update 62
Recovery 62
About 63
You can access the display’s settings using the Menu button on the front control panel.
Exiting the display’s settings
To exit the display’s settings
Tap Exit
OR
press the Menu button on the front control panel
Network
Option Values Function Notes
Ethernet
Ethernet
Enable
Disable
Enables or disables connecting to a
network with the wired RJ45 jacks
Enabling Ethernet disables Wi-Fi.
Get IP address
automatically
Enable
Disable
The display automatically acquires
an IPaddress from a DHCPserver
on your network
Enabling Wi-Fi hotspot allows you to
connect your mobile device to the
display using Wi-Fi for screen
sharing.