SMART MX Series - Screen Lock

APPENDIX B
ADJUSTING DISPLAY SETTINGS
60 smarttech.com/kb/171257
Option Values Function Notes
Static IPaddress
Enable
Disable
Enter a static IPaddress Use the on-screen keyboard or
connect a USB keyboard to the
Display USB Type-A connector on
the front connector panel to enter
information.
Wi-Fi
Enable
Disable
Enables or disables connecting to a
network wirelessly
Turn on Wi-Fi to discover networks.
Enabling Wi-Fi disables Ethernet.
Wi-Fi hotspot
Wi-Fi hotspot
Enable
Disable
Enables or disables the Wi-Fi
hotspot
The lock screen appears after the
display wakes up from sleep.
Set up Wi-Fi hotspot
[N/A] Sets the network name, security,
password and access point
frequency
Use the on-screen keyboard or
connect a USB keyboard to the
Display USB Type-A connector on
the front connector panel to enter
information.
Network status
[N/A] Shows information about the
display’s current network
connection
[N/A]
Screen lock
Option Values Function Notes
Lock screen mode
Lock screen mode
Enable
Disable
Turns lock screen on or off [N/A]
Image
[N/A] Select a custom image for the lock
screen
l Supports .png, .jpg, .bmp files
l Save the wallpaper file to a
USBdrive and insert it into
the USB port. See Front
connector panel on page5.
Disable
[N/A] Turns off the custom image for the
lock screen
[N/A]
Lock screen password
Enable
Disable
Set a PINto unlock the lockscreen [N/A]
Settings security
Enable
Disable
Set a PIN to access certain settings When Settings security is enabled,
only Advanced and About settings
are available.To access the other
settings, tap the setting and enter
the PIN.