APPENDIX B
ADJUSTING DISPLAY SETTINGS
61 smarttech.com/kb/171257
Advanced
Option Values Function Notes
Display
Walllpaper
[N/A] Sets the background image on the
display
l Only .png, .jpg, .bmp files are
supported
l Save the wallpaper file to a
USBdrive and insert it into
the USB port. See Front
connector panel on page5.
Launcher
[Apps] Select which apps appear in the
launcher.
[N/A]
Home screen
[Apps] Select three apps to appear on the
home screen
Tap the app you want to remove
from the home screen. Then select
the app you want to appear on the
home screen instead.
HDMI out
480p
1080p
4K
Select the output resolution Ensure the device that is receiving
the display’s HDMI out signal
matches the selected output
resolution.
Sleep
15 minutes
30 minutes
45 minutes
60 minutes
Always on
When a time interval is selected, the
display’s screen will turn off even if
the connected computer or device
is still on.
If the iQ experience is selected,the
display’s screen will not turn off
when a time interval is selected.
Brightness and volume
Auto
[N/A] Automatically sets the display’s
brightness based on the room’s
brightness.
The ambient light sensor can detect
the room brightness and adjust the
display’s screen brightness
Manual
[N/A] Sets the display’s brightness level Disable Auto to set the brightness
manually
Volume
[N/A] Sets the display’s volume level [N/A]
OTA
OTAserver
[OTA servers] Sets which server the display
connects to for updates
NOTE
The display must be connected
to the Internet to check for
system software updates.
Default is Auto.
To Next Page
Loading...
Need help?
General
