SMC Networks LECP1 Series User Manual

- 8 -
2.4 Procedure （How to start the actuator)
Install, wire, set and operate the controller referring to the procedure below when the product is used
for the first time.
(1) Checking the contents of the package
After unpacking everything, check the description on the label to identify the controller and the
number of accessories.
* These items are included if you ordered using the part number for an actuator set.
If parts are missing or damaged, please contact our distributor.
(2) Mounting the Controller
Refer to 3.4 Mounting (P. 13) to mount the controller.
(3) Controller Wiring / Connection
Connect cables to the controller connectors (CN1 to CN4). Refer to 4. External connection (P.15)
for the wiring of the cables.
Part’s name Quantity
Controller
（
LECP1□□-□
）
1 pcs.
Power supply cable
(LEC-CK1-1)
1 pcs.
I/O cable *(LEC-CK4-□) 1 pcs.
Actuator * 1 pcs.
Actuator cable *
Robot cable: LE-CP-□
or
Standard cable: LE-CP-□S
1 pcs.
Controller
Power supply cable
Connectors
I/O cable
Actuator cable

SMC Networks LECP1 Series Specifications

General

Brand	SMC Networks
Model	LECP1 Series
Category	Controller
Language	English