C
ONFIGURING
THE
S
WITCH
2-102
which had been receiving query packets) to have expired. (Default: 300
seconds, Range: 300 - 500)
• IGMP Version — Sets the protocol version for compatibility with
other devices on the network. (Default: 2, Range: 1 - 2)
Notes: 1. All systems on the subnet must support the same version.
2. Some attributes are only enabled for IGMPv2, including
IGMP Report Delay and IGMP Query Timeout.
Web – Click IGMP, IGMP Configuration. Adjust the IGMP settings as
required, and then click Apply. (The default settings are shown below.)
To Next Page
Loading...
