SMC Networks TigerSwitch 100 - Radius-Server Retransmit; No Radius-Server Retransmit

C OMMAND L INE I NTERFACE
3-54
Default Setting
None
Command Mode
Global Configuration
Example
radius-server retransmit
Use this command to set the number of retries. Use the no form to restore
the default.
Syntax
radius-server retransmit number_of_retries
no radius-server retransmit
number_of_retries - Number of times the switch will try to
authenticate logon access via the RADIUS server. (Range: 1 - 30)
Default Setting
2
Command Mode
Global Configuration
Example
Console(config)#radius-server key green
Console(config)#
Console(config)#radius-server retransmit 5
Console(config)#