S
YSTEM
M
ANAGEMENT
C
OMMANDS
3-25
System Management Commands
These commands are used to control system logs, passwords, user name,
browser configuration options, and display or configure a variety of other
system information.
Command Function Mode Page
Device Description Command
hostname Specifies or modifies the host name for the
device
GC 3-27
User Access Commands
username Sets user name authentication at login GC 3-27
enable password Sets a password to control access to various
privilege levels
GC 3-29
Jumbo Frame Command
jumbo frame Allows jumbo frames to pass through the
switch
GC 3-30
Web Server Commands
ip http port Specifies the port to be used by the Web
browser interface
GC 3-31
ip http server Allows the switch to be monitored or
configured from a browser
GC 3-31
ip http
secure-server
Enables the HTTPS server on the switch
GC
3-32
ip http secure-port Specifies the UDP port number used for
HTTPS connection to the switch’s Web
interface
GC
3-33
Secure Shell Commands
ip ssh server Enables the SSH server on the switch
GC 3-35
ip ssh Specifies the authentication timeout for the
SSH server and the number of retries allowed
by a client
GC 3-34
disconnect ssh Terminates an SSH connection
PE
3-36
To Next Page
Loading...
