SMC Networks TigerSwitch 100 - Show Spanning-Tree

S PANNING T REE C OMMANDS
3-119
show spanning-tree
Use this command to show the configuration for the Spanning Tree.
Syntax
show spanning-tree [interface]
• interface
• ethernet unit/port-number
- unit - This is device 1.
- port-number
• port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
•Use the show spanning-tree command with no parameters to display
the Spanning Tree configuration for the Spanning Tree and for every
interface in the tree.
•Use the show spanning-tree interface command to display the
Spanning Tree configuration for an interface within the Spanning Tree