SMC Networks TigerSwitch 100 - Reload; End

C OMMAND L INE I NTERFACE
3-16
reload
Use this command to restart the system.
Note: When the system is restarted, it will always run the Power-On
Self-Test. It will also retain all configuration information stored in
nonvolatile memory by the copy running-config startup-config
command.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
This command resets the entire system.
Example
This example shows how to reset the switch:
end
Use this command to return to Privileged Exec mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration, Line Configuration,
VLAN Database Configuration
Console#reload
System will be restarted, continue <y/n>? y