C
OMMAND
L
INE
I
NTERFACE
3-50
Example
Authentication Commands
You can configure the switch to authenticate users logging into the system
for management access using local or authentication-server methods.
Remote Authentication Dial-in User Service (RADIUS) and Terminal
Access Controller Access Control System Plus (TACACS+) are logon
authentication protocols that use software running on a central server to
control access to RADIUS-aware or TACACS+-aware devices on the
network. An authentication server contains a database of multiple user
name/password pairs with associated privilege levels for each user or
group that require management access to a switch.
Console#show version
Unit1
Serial number :A217056372
Service tag :[NONE]
Hardware version :R0C
Number of ports :24
Main power status :up
Redundant power status :not present
Agent(master)
Unit id :1
Loader version :1.0.0.0
Boot rom version :1.0.0.0
Operation code version :1.0.1.4
Console#
Command Function Mode Page
Authentication Method
authentication login Defines logon authentication method
and precedence
GC 3-51
RADIUS Client
radius-server host Specifies the RADIUS server GC 3-52
radius-server port Sets the RADIUS server network port GC 3-53
radius-server key Sets the RADIUS encryption key GC 3-53
radius-server retransmit Sets the number of retries GC 3-54
To Next Page
Loading...
