C
OMMAND
L
INE
I
NTERFACE
3-18
Command Mode
Normal Exec, Privileged Exec
Command Usage
The quit and exit commands can both exit the configuration program.
Example
This example shows how to quit a CLI session:
Flash/File Commands
These commands are used to manage system code and configuration files.
copy
Use this command to move (upload/download) a code image or
configuration file between the switch’s Flash memory and a TFTP server.
When you save the system code or configuration settings to a file on a
TFTP server, that file can later be downloaded to the switch to restore
Console#quit
Press ENTER to start session
User Access Verification
Username:
Command Function Mode Page
copy Copies a code image or a switch configuration
to or from Flash memory or a TFTP server
PE 3-18
delete Deletes a file or code image PE 3-21
dir Displays a list of files in Flash memory PE 3-22
whichboot Displays the files booted PE 3-23
boot system Specifies the file or image used to start up the
system
GC 3-24
To Next Page
Loading...
