SMC Networks TigerSwitch 100 - Snmp-Server Contact; Snmp-Server Location

C OMMAND L INE I NTERFACE
3-60
snmp-server contact
Use this command to set the system contact string. Use the no form to
remove the system contact information.
Syntax
snmp-server contact string
no snmp-server contact
string - String that describes the system contact information.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp-server location (3-60)
snmp-server location
Use this command to set the system location string. Use the no form to
remove the location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
Console(config)#snmp-server contact Paul
Console(config)#