SMC Networks TigerSwitch 100 - Ip Ssh Server

S YSTEM M ANAGEMENT C OMMANDS
3-35
Default Setting
timeout: 120 seconds
count: 3
Command Mode
Global Configuration
Command Usage
The timeout specifies the interval the switch will wait for a response
from the client during the SSH negotiation phase. Once an SSH session
has been established, the timeout for user input is controlled by the
exec-timeout command for vty sessions.
Example
Related Commands
show ip ssh (3-37)
ip ssh server
Use this command to enable the Secure Shell (SSH) server on this switch.
Use the no form to disable this service.
Syntax
ip ssh server
no ip ssh server
Default Setting
Disabled
Command Mode
Global Configuration
Console(config)#ip ssh timeout 60
Console(config)#ip ssh authentication-retires 2
Console(config)#