SMC Networks TigerSwitch 100 - Show Ip Redirects

IP C OMMANDS
3-71
Command Mode
Privileged Exec
Command Usage
This switch can only be assigned one IP address. This address is used
for managing the switch.
Example
Related Commands
show ip redirects (3-71)
show ip redirects
Use this command to show the default gateway configured for this
device.
Default Setting
None
Command Mode
Privileged Exec
Example
Related Commands
ip default-gateway (3-70)
Console#show ip interface
IP address and netmask: 10.1.0.54 255.255.255.0 on VLAN 1,
and address mode: User specified.
Console#
Console#show ip redirects
ip default gateway 10.1.0.254
Console#