SMC Networks TigerSwitch 100 - Interface Commands; Command Function; Mode Page

C OMMAND L INE I NTERFACE
3-84
Command Mode
Normal Exec, Privileged Exec
Example
To show all lines, enter this command:
Interface Commands
These commands are used to display or set communication parameters for
an Ethernet port, aggregated link, or VLAN.
Console#show line
Console configuration:
Password threshold: 3 times
Interactive timeout: Disabled
Silent time: Disabled
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Vty configuration:
Password threshold: 3 times
Interactive timeout: 65535
Console#
Command Function Mode Page
interface Configures an interface type and enters interface
configuration mode
GC 3-85
description Adds a description to an interface configuration IC 3-86
speed-duplex Configures the speed and duplex operation of a
given interface when autonegotiation is disabled
IC 3-86
negotiation Enables autonegotiation of a given interface IC 3-88
capabilities Advertises the capabilities of a given interface
for use in autonegotiation
IC 3-89
flowcontrol Enables flow control on a given interface IC 3-90
shutdown Disables an interface IC 3-91
switchport
broadcast
Configures broadcast storm control IC 3-92