SMC Networks TigerSwitch 100 - Logging Trap

C OMMAND L INE I NTERFACE
3-42
logging trap
Use this command to limit syslog messages saved to a remote server based
on severity. Use the no form to return the remote logging of syslog
messages to the default level.
Syntax
logging trap level
no logging trap level
level - One of the level arguments listed below. Messages sent
include the selected level up through level 0.
Default Setting
Level 3 - 0
Command Mode
Global Configuration
Example
Level Argument Level Description Syslog Definition
emergencies 0 System unusable LOG_EMERG
alerts 1 Immediate action needed LOG_ALERT
critical 2 Critical conditions LOG_CRIT
errors 3 Error conditions LOG_ERR
warnings 4 Warning conditions LOG_WARNING
notifications 5 Normal but significant
condition
LOG_NOTICE
informational 6 Informational messages
only
LOG_INFO
debugging 7 Debugging messages LOG_DEBUG
Console(config)#logging trap 4
Console(config)#