SMC Networks TigerSwitch 100 - RADIUS Settings; TACACS+ Settings

S ECURITY
2-17
The local switch user database has to be set up by manually entering user
names and passwords using the CLI.
RADIUS Settings
• Server IP Address – Address of the RADIUS server.
(Default: 10.1.0.1)
• Server Port Number – Network (UDP) port of the RADIUS server
used for authentication messages.
(Range: 1-65535; Default: 1812)
• Secret Text String – Encryption key used to authenticate logon access
for client. Do not use blank spaces in the string.
(Maximum length: 20 characters)
• Number of Server Transmits – Number of times the switch will try
to authenticate logon access via the RADIUS server.
(Range: 1-30; Default: 2)
• Timeout for a reply (secs) – The number of seconds the switch waits
for a reply from the RADIUS server before it resends the request.
(Range: 1-65535; Default: 5)
TACACS+ Settings
• Server IP Address – Address of the TACACS+ server.
(Default: 10.1.0.1)
• Server Port Number – Network (TCP) port of TACACS+ server
used for authentication messages.
(Range: 1-65535; Default: 1812)
• Secret Text String – Encryption key used to authenticate logon access
for client. Do not use blank spaces in the string.
(Maximum length: 20 characters)
Note: The local switch user database has to be set up by manually
entering user names and passwords using the CLI.