SMC Networks TigerSwitch 100 - Show Mac-Address-Table

C OMMAND L INE I NTERFACE
3-102
Example
show mac-address-table
Use this command to view classes of entries in the bridge-forwarding
database.
Syntax
show mac-address-table [address mac-address [mask]] [interface
interface] [vlan vlan-id] [sort {address | vlan | interface}]
• mac-address - MAC address.
• mask - Bits to match in the address.
• interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-4)
• vlan-id - VLAN ID (Range: 1-4094)
• sort - Sort by address, vlan or interface.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• The MAC Address Table contains the MAC addresses associated with
each interface. Note that the Type field may include the following
types:
- Learned - dynamic address entries
- Permanent - static entry
Console(config)#mac-address-table static 00-e0-29-94-34-de ethernet
1/1 vlan 1 delete-on-reset
Console(config)#