SMC Networks TigerSwitch 100 - Show Mac-Address-Table Aging-Time

C OMMAND L INE I NTERFACE
3-104
Syntax
mac-address-table aging-time seconds
no mac-address-table aging-time
seconds - Time is number of seconds (17-2184).
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The aging time is used to age out dynamically learned forwarding
information.
Example
show mac-address-table aging-time
Use this command to show the aging time for entries in the address table.
Default Setting
None
Command Mode
Privileged Exec
Example
Console(config)#mac-address-table aging-time 100
Console(config)#
Console#show mac-address-table aging-time
Aging time: 300 sec.
Console#