F
LASH
/F
ILE
C
OMMANDS
3-19
system operation. The success of the file transfer depends on the
accessibility of the TFTP server and the quality of the network connection.
Syntax
copy file {file | running-config | startup-config | tftp}
copy running-config {file | startup-config | tftp}
copy startup-config {file | running-config | tftp}
copy tftp {file | running-config | startup-config |
https-certificate}
• file - Keyword that allows you to copy to/from a file.
• running-config - Keyword that allows you to copy to/from the
current running configuration.
• startup-config - The configuration used for system initialization.
• tftp - Keyword that allows you to copy to/from a TFTP server.
• https-certificate - Copies an HTTPS certificate from an TFTP
server to the switch.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• The system prompts for data required to complete the copy command.
• The file names are case sensitive. The destination file name should not
contain slashes (\ or /), the leading letter of the file name should not
be a period (.), and the maximum length for file names on the TFTP
server is 127 characters or 31 characters for files on the switch. (Valid
characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
• The number of user-defined configuration files is limited only by
available Flash memory space.
• You can use “Factory_Default_Config.cfg” as the source to copy from
the factory default configuration file, but you cannot use
“Factory_Default_Config.cfg” as the destination.
To Next Page
Loading...
