SMC Networks TigerSwitch 100 - Page 36

C ONFIGURING THE S WITCH
2-6
Port Security Action Configures the port intrusion action globally for
the switch
2-40
Port Security Status Enables port security on specified ports 2-40
Address Table
Static Addresses Displays entries for interface, address or VLAN 2-41
Dynamic Addresses Displays or edits static entries in the Address
Table
2-42
Address Aging Sets timeout for dynamically learned entries 2-44
Spanning Tree
STP Information Displays STP values used for the bridge 2-46
STP Configuration Configures global bridge settings for STP 2-50
STP Port Information Configures individual port settings for STP 2-54
STP Trunk
Information
Configures individual trunk settings for STP 2-54
STP Port
Configuration
Configures individual port settings for STP 2-58
STP Trunk
Configuration
Configures individual trunk settings for STP 2-58
VLAN
VLAN Basic
Information
Displays basic information on the VLAN type
supported by this switch
2-65
VLAN Current Table Shows the current port members of each VLAN
and whether or not the port supports VLAN
tagging
2-66
VLAN Static List Used to create or remove VLAN groups 2-68
VLAN Static Table Modifies the settings for an existing VLAN 2-70
VLAN Static
Membership by Port
Configures membership type for interfaces
including tagged and untagged
2-72
VLAN Port
Configuration
Specifies default PVID and VLAN attributes 2-73
VLAN Trunk
Configuration
Specifies default trunk VID and VLAN
attributes
2-73
Menu Description Page