P
ORT
C
ONFIGURATION
2-37
500-262143
packets per second; Default: 500 packets per second)
• Broadcast Control Status – Shows whether or not broadcast storm control
has been enabled. (Default: Enabled)
Web – Click Port, Port Broadcast Control. Set the threshold for all ports,
and then click Apply.
CLI – Specify the required interface, and then enter the threshold. The
following sets broadcast suppression at 128 packets per second on port 1.
Console(config)#interface ethernet 1/1 3-85
Console(config-if)#switchport broadcast packet-rate 128 3-92
Console(config-if)#
To Next Page
Loading...
