A
DDRESS
T
ABLE
S
ETTINGS
2-43
Command Usage
• You can display entries in the dynamic address table by selecting an
interface (either port or trunk), MAC address, or VLAN.
• You can sort the information displayed based on interface (port or
trunk), MAC address, or VLAN.
Web – Click Address Table, Dynamic Addresses. Specify the search type
(i.e., Interface, MAC Address, or VLAN), the method of sorting the
displayed addresses, then click Query.
For example, the following screen shows the dynamic addresses for port 5.
CLI – This example displays the address table entries for port 11.
Console#show mac-address-table interface ethernet 1/11 3-102
Interface Mac Address Vlan Type
--------- ----------------- ---- -----------------
Eth 1/11 00-10-b5-62-03-74 1 Learned
Console#
To Next Page
Loading...
