VLAN C
ONFIGURATION
2-67
Web – Click VLAN, VLAN Current Table. Select any ID from the
scroll-down list.
Command Attributes for CLI Interface
• VLAN – ID of configured VLAN (1-4094, no leading zeroes).
• Type – Shows how this VLAN was added to the switch.
- Dynamic: Automatically learned via GVRP.
- Static: Added as a static entry.
• Name – Name of the VLAN (1 to 32 characters).
• Status – Shows if this VLAN is enabled or disabled.
- Active: VLAN is operational.
- Suspend: VLAN is suspended; i.e., does not pass packets.
To Next Page
Loading...
