VLAN C
ONFIGURATION
2-69
• State – Shows if this VLAN is enabled or disabled (CLI).
- Active: VLAN is operational.
- Suspend: VLAN is suspended; i.e., does not pass packets.
• Add – Adds a new VLAN group to the current list.
• Remove – Removes a VLAN group from the current list. If any port
is assigned to this group as untagged, it will be reassigned to VLAN
group 1 as untagged.
Web – Click VLAN, VLAN Static List. Enter the VLAN ID and VLAN
name, mark the Enable checkbox to activate the VLAN, and then click
Add.
CLI – This example creates a new VLAN.
Console(config)#vlan database 3-122
Console(config-vlan)#vlan 5 name R&D media ethernet state
active 3-123
Console(config-vlan)#
To Next Page
Loading...
