Snap-On PRO-LINK EDGE - Configure Proxy

138 PRO-LINK
®
Edge Hardware and Software User’s Manual
Chapter 6 • Using the Settings Menu
Configure Proxy
If your local network is configured using a proxy server, you will need to enter in-
formation to tell PRO-LINK
®
Edge how to communicate with it.
NOTE:
i If your local network is not configured using a proxy server, you do not
need to enter these settings.
It may be preferable to have the designated IT person or network administrator for
your location perform this task for you. There is required information that you will
need prior to proceeding.
To enter proxy settings:
1 Select Configure Proxy from the Wireless Networks screen (Figure 6.8).
Figure 6.10 Configure Proxy
2 Touch the Use Proxy Server check box to activate it (a check mark is dis-
played in the box).
3 T
ouch within the Server dat
a entry box.