Snap-On PRO-LINK EDGE - The Drop-Down Menu: Connected Status

22 PRO-LINK
®
Edge Hardware and Software User’s Manual
Chapter 2 • Hardware and User Interface Overview
The Drop-down Menu: Connected Status
When you are connected to a vehicle, the drop-down menu in the upper-left
corner of the display provides menu items that are not available to you when
you are not connected.
Figure 2.9 Drop-Down Menu: Connected Status
• View Vehicle Specs—Displays the Vehicle Specifications screen, which
you can print if you have previously installed a printer. You can also save
the information to a file, i.e., a PDF (either to the device, to an SD Card,
or to a USB device).
• Create Report—Displays the Print Selection menu
. Once you make
your selections, you can print your customized report.
• Units—Enables you to select how you want to display units of measure
(E
nglish vs. Metric); also available when not connected to a vehicle.
• Support—Displays the Support screen
• End Session—Ends the session, discon
ne
cts from the vehicle, and re-
turns you to the Main Menu (Fig
ure 2.6).
• About—Displays the PRO-LINK Edge info
rmation box; also available
when not connected to a vehicle.