- The Diagnostics Menu
PRO-LINK
®
Edge Hardware and Software User’s Manual 59
Faults
The Faults screen is the default display on the Diagnostics Menu. Other selections
are available on the left side of the display (e.g., Engine, Calibrations, Tests).
From the faults screen display you can:
• View active and inactive faults (pg. 59)
• View more information on a particular fault (pg. 60)
• Clear All Faults (pg. 62)
Viewing Active and Inactive Faults
Faults are displayed in two categories:
• ACTIVE FAULTS faults on the left side
• INACTIVE Faults on the right side
Figure 4.2 Faults Screen
Touch the screen to scroll through the two lists.
To Next Page
Loading...
