- The Diagnostics Menu
PRO-LINK
®
Edge Hardware and Software User’s Manual 65
A list of parameters for the selected category is displayed.
Figure 4.7 List of Parameters
All parameters available for the category you selected (e.g., Pressures) are
displayed in the list to the right of the categories. Values, if available, are
also displayed. Touch the screen, and drag your finger up to move down the
list.
You can select another category from the list on the left, or create a Quick
List
.
Managing Quick Lists
You can create a Quick List to store parameters, and display them side by side,
from either one or both of the following:
• Different categories (i.e., the categor
i
es on the left side of the display)
• Different modules (e.g., Engine, Engine Retarder, etc.)
There can be only one Quick List. You may, however, clear the Quick List and
crea
te a new one when you need to compare other parameters.
To Next Page
Loading...
