Snap-On PRO-LINK EDGE - Set as Default; Delete; Change Settings

- The Settings Menu
PRO-LINK
®
Edge Hardware and Software User’s Manual 145
12 Touch Print Test Page to make sure you can print to the printer.
13 T
ouch OK.
NOTE:
i If you could not connect to the printer, touch Change Settings and check
the information you entered on the Add Printer screen (Figure 6.15). Make
any necessary changes, and then try printing a test page again.
Set as Default
Use the Set as Default button to set your default printer, or to set your print default
to Save as File (e.g., a PDF).
To set a printer as your default printer:
1 Highlight the printer you added (see Figure 6.17).
2 T
ouch Set as Default to make this printer your default printer.
NOTE:
i You can also select Save to File and then set that option as the default.
Delete
Use the Delete button to delete a printer. For example, you no longer wish to use
that printer.
To delete a printer:
1 Highlight the printer you wish to delete (see Figure 6.17).
2 T
ouch Delete.
Change Settings
Use the Change Settings button to make any changes to the printer settings you
entered on the Add Printer screen (see Figure 6.15). For example, you were
unable to print a test page.
To change printer settings:
1 Highlight the printer you added (see Figure 6.17).
2 T
ouch Change Settings.
3 Make any
necessary changes.
4 T
ouch Update.
5 T
ouch Print Test Page again to see if you can print to the printer.