Snap-On PRO-LINK EDGE - The Calibrations Tab

44 PRO-LINK
®
Edge Hardware and Software User’s Manual
Chapter 3 • Getting Started
The Calibrations Tab
The Calibrations tab lists the calibrations available for each module and displays
the screens you need to calibrate those parameters. If a module does not contain
any calibrations, a message is displayed.
NOTE:
i For some parameters a password is required.
The first time the Calibrations tab is selected during a session, a message in-
structs
you to select a module.
Select a module (e.g., En
gine - MaxxForce - Ch1).
Figure 3.15 Select a Module Screen