Snap-On PRO-LINK EDGE - Select a Calibration Category

- The Diagnostics Menu
PRO-LINK
®
Edge Hardware and Software User’s Manual 77
Select a Calibration Category
A calibration category is a collection of related calibrations. The first time you
select the Calibrations tab during a session, the PRO-LINK
®
Edge prompts you to
select a module, and then displays the available calibration categories for that
module.
To select a calibration category and view the associated datapoints:
1 From the Diagnostics Menu (Figure 4.1), select the Calibrations.
If you have not yet used the Calibrations du
ring your current session, the
Select a Module screen is displayed.
Figure 4.20 Select a Module Screen
2 Touch the screen to select the module you want (e.g., Engine - MaxxForce
- Ch1).
NOTE:
i Depending on the vehicle to which you are connected, there may be more
than one module in the list on the left.