Snap-On PRO-LINK EDGE - Calibrating the Touchscreen

148 PRO-LINK
®
Edge Hardware and Software User’s Manual
Chapter 6 • Using the Settings Menu
Calibrating the Touchscreen
Occasionally, you may need to calibrate the touchscreen for optimal performance
(e.g., if touching the screen does not result in the expected action).
To calibrate the touchscreen:
1 Select Touchscreen from the Settings Menu (Figure 6.19
Figure 6.20 Calibrate Touchscreen
).
2 Touch Calibrate to
start.
3 Carefully tap the center of the cross hairs at the center of the target.
4 Repeat as the target moves around the screen until the target no longer
dis
plays.