Snap-On PRO-LINK EDGE - Parameters

- The Diagnostics Menu
PRO-LINK
®
Edge Hardware and Software User’s Manual 63
Parameters
The Parameters screen is accessed by touching one of the Parameters tabs (e.g.,
Engine) on the left-side of the Diagnostics Menu.
NOTE:
i The PRO-LINK
®
Edge creates a Parameters tab for each module (e.g.,
Engine - Paccar - Ch1 and Engine Retarder- HDS J1939 Ch1) loaded
during the scanning process.
Figure 4.5 Sample Parameters Screen
From the Parameters tab you can:
• View parameters (pg. 64)
• Manage Quick Lists (pg. 65)
• Create and view a Quick List (pg. 67)
• Remove parameters from a Quick List (pg. 71)
• Graph data (pg. 74)