Snap-On PRO-LINK EDGE - The Diagnostics Menu

58 PRO-LINK
®
Edge Hardware and Software User’s Manual
Chapter 4 • Using the Diagnostics Menu
The Diagnostics Menu
Once the PRO-LINK
®
Edge has successfully scanned the vehicle for faults, the
Diagnostics Menu is displayed.
NOTE:
i For detailed information on connecting to a vehicle and the scanning pro-
cess, refer to “Connecting to a Vehicle” and “Scanning a Vehicle” in
Chapter 3: Getting Started, earlier in this manual.
Figure 4.1 Diagnostics Menu
At this point, you are ready to start using the features available from the
Diagnostics Menu. A number of menu-selections are displayed on the right
side of the screen.
• Fa
ults (p
g. 59)
• Parameters (pg. 63)
• Calibrations (pg. 76)
• Tests (pg
. 85)