Snap-On PRO-LINK EDGE - Bus Diagnostics

176 PRO-LINK
®
Edge Hardware and Software User’s Manual
Chapter 8 • Using the Support Menu
Bus Diagnostics
Launching Bus Diagnostics checks that the vehicle communication bus is working
as expected.
NOTE:
i Do not enable this utility unless directed to do so by a Technical Support
specialist.
To launch Bus Diagnostics:
1 Touch the Launch button to initiate.
The Bus Diagnos
tics screen is displayed.
Figure 8.15 Bus Diagnostics Screen
2 Select the appropriate Protocol from the drop-down menu in the upper-right
corner of the screen.
3 Touch St
art.
4 Touch S
top to end the session.
5 Touch the Back A
rrow to return to the Troubleshoot Menu (Figure 8.11).