- Scanning a Vehicle
PRO-LINK
®
Edge Hardware and Software User’s Manual 33
Scanning a Vehicle
The following scanning options are available:
• HD Scan (
Auto)—Scans the vehicle, presents a list of ECMs detected
during scanning, and enables you to select up to six (6) modules from
the list.
• LMT—Begin
s
the Light and Medium Truck scanning process.
i A Manual Scan option is also available. See “Manual Scan” in Chapter 8:
Using the Support Menu, later in this manual.
To scan a vehicle:
1 Verify that the connections are tight and solid before scanning begins.
2 From the Main Menu (Fig
ure 3.1), select HD Scan.
Figure 3.2 Vehicle Scan Menu
• HD Scan (pg. 34)
•LMT (pg. 38)
To Next Page
Loading...
